PnP JEDEC Timing Parameters
DDR3-1600 CL9-9-9 @ 1.35 V or 1.5 V
DDR3-1333 CL8-8-8 @ 1.35 V or 1.5 V
DDR3-1066 CL6-6-6 @ 1.35 V or 1.5 V
DDR3-1333 CL8-8-8 @ 1.35 V or 1.5 V
DDR3-1066 CL6-6-6 @ 1.35 V or 1.5 V
Features
JEDEC standard 1.35V (1.28 to 1.45V) and 1.5V (1.425 to 1.575V) power supply
800 MHz fCK for 1600 Mb/s per pin
8 independent internal banks
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
Bi-directional differential data strobe
Internal self-calibration through ZQ pin (RZQ: 240 ohms ± 1%)
On-Die Termination using ODT pin
Average refresh period 7.8 us at lower than TCASE 185°F (85°C), 3.9 us at 185°F (85°C) < TCASE ≤ 203°F (95°C)
Asynchronous reset
Row Active Time (tRASmin): 33.75ns (min.)